The Bickers HMS-A Hot Melt Spray glue gun can spray high and low viscouses, pressure sensitive and standard hot melts without solvents. From the smallest adhesive point of approx. 0,1g up to a line of 100mm length and 2 – 150mm width, extremely thin or millimetres thick.
Air pressure regulation and gauge pressure indicator are integrated in the bed plate. Fine adjustment of the air pressure guarantees an optimal and exact adhesive application in the range of 0.2 to 6bars. Spraying air and glue pressure can be controlled via pressure gauges.
Spraying of adhesives has many advantages. You can applicate e.g. adhesives on difficult to reach areas without problems. With pressure sensitive adhesives it is possible to achieve a permanent adhesion with unlimited handling time (like double-sided adhesive tape).
Whilst applicating and spraying hot melt adhesives no unhealthy solvents are released.
The Bickers Exakt accessoieres ensure a work place configuration taylor-made to your needs.
- ergonomically formed handle for fartigue-free working
- non breakable housing with integrated stand
- Ablagestativ mit Druckluftregelung und Manometer
- lit On/ Off-switch
- manometer display
- temperature control
- Adjustor to ore-set the amount of glue output
- integrated tank with 250ml capacity
- high-quality processing
|Connecction:||220V / 110V erhätlich|
|Air pressure:||6 bar|
|Tankinhalt:||250ml / 310ml|
|Heating-up time:||3-6 min.|
|Max. output per hour.:||250ml / 310m|