
Cold glue detection in perfection GDX1000.
With the completely newly developed GDX 1000 adhesive sensor, based on thousands of installations, Baumer hhs provides its customers with the right quality assurance tool for future requirements.
Take your production to the next level.
— Reduced set-up times
— Early detection of emerging defects
— Reliable monitoring of adhesive-free areas
— Easy set up
— Set up and check the sensor on the control unit
— Scanning frequency 20kHz
With the completely newly developed GDX 1000 adhesive sensor, based on thousands of installations, Baumer hhs provides its customers with the right quality assurance tool for future requirements.
Take your production to the next level.
— Reduced set-up times
— Early detection of emerging defects
— Reliable monitoring of adhesive-free areas
— Easy set up
— Set up and check the sensor on the control unit
— Scanning frequency 20kHz
Especially for use with multipoint gluers ULT400XL.The ULT 400 XL is specially designed for use in multipoint gluers.
The specially developed optics allow a greater distance to the product. This is particularly advantageous with thicker cardboard and corrugated board.
– Measuring distance 62.5 ± 12.5 mm
The specially developed optics allow a greater distance to the product. This is particularly advantageous with thicker cardboard and corrugated board.
– Measuring distance 62.5 ± 12.5 mm
PGD 1000 A Sensor, but camera like
The PGD 1000 is the new benchmark in glue detection for corrugated production.
Designed for the upcoming challenges of the industry.
— 100% detection of cold glue
— No optical brighteners are needed in the adhesive
— Regardless of whether the substrate is printed or not
The PGD 1000 is the new benchmark in glue detection for corrugated production.
Designed for the upcoming challenges of the industry.
— 100% detection of cold glue
— No optical brighteners are needed in the adhesive
— Regardless of whether the substrate is printed or not
ULT300 Proven thousands of times.
The ULT-300 is used in many installations worldwide. It stands for reliable cold glue detection in many applications.
— Compact design
— Set up on the sensor
— Reliable
The ULT-300 is used in many installations worldwide. It stands for reliable cold glue detection in many applications.
— Compact design
— Set up on the sensor
— Reliable
GDM300 Cold glue detection on metallised substrate.
Finishing is all around us in folding carton production. The GDM-300 is specially designed for adhesive detection on metallised board surfaces.
— Special application
— Foil finishing
— Precise adhesive detection
Finishing is all around us in folding carton production. The GDM-300 is specially designed for adhesive detection on metallised board surfaces.
— Special application
— Foil finishing
— Precise adhesive detection
LNT300 Checking disc glue application.
With the LNT-300, Baumer hhs provides all users of disc gluing systems with a reliable solution for inspection.
The sensor reliably detects the adhesive and is thus part of the quality monitoring in straightline production.
— Easy set up.
— Reliable at all machine speeds.
— Adjustable via Baumer hhs control units.
With the LNT-300, Baumer hhs provides all users of disc gluing systems with a reliable solution for inspection.
The sensor reliably detects the adhesive and is thus part of the quality monitoring in straightline production.
— Easy set up.
— Reliable at all machine speeds.
— Adjustable via Baumer hhs control units.
HLT300 Reliable detection. Dot for dot!
With the HLT-300 you can detect every adhesive dot. Wherever hot glue is applied, monitoring is important. The HLT-300 detects not only the presence, but also whether the adhesive is still hot enough to ensure reliable bonding.
— Reliable hot-melt detection.
— For dot and line application.
— Evaluation in the sensor.
With the HLT-300 you can detect every adhesive dot. Wherever hot glue is applied, monitoring is important. The HLT-300 detects not only the presence, but also whether the adhesive is still hot enough to ensure reliable bonding.
— Reliable hot-melt detection.
— For dot and line application.
— Evaluation in the sensor.
HLT30 SPS Hot melt detection for evaluation on a PLC.
In packaging production, the use of hot-melt for closing folding boxes is standard. For this application, the HLT-300 was also developed in a version that can be evaluated directly at a PLC machine control.
This makes it possible to monitor the glue application in this application as well.
— Reliable hot melt detection.
— For dot application and line application.
— Evaluation in the sensor.
In packaging production, the use of hot-melt for closing folding boxes is standard. For this application, the HLT-300 was also developed in a version that can be evaluated directly at a PLC machine control.
This makes it possible to monitor the glue application in this application as well.
— Reliable hot melt detection.
— For dot application and line application.
— Evaluation in the sensor.
CT300 Detection of coloured barcodes.
Glue flaps are provided with barcodes for anti-mix control. The CT-300 is not only able to read single-colour codes, but also coloured codes.
With its high resolution, it enables the use of small codes. This means that coding on very small flaps is also possible.
— Colour code recognition.
— High resolution.
— Code lengths from 19 mm.
Glue flaps are provided with barcodes for anti-mix control. The CT-300 is not only able to read single-colour codes, but also coloured codes.
With its high resolution, it enables the use of small codes. This means that coding on very small flaps is also possible.
— Colour code recognition.
— High resolution.
— Code lengths from 19 mm.
SCAN400 Read barcodes safely.
Different barcodes are used at many points in the production of packaging. The evaluation of the codes is essential for error-free production. With the SCAN 400 you are always on the safe side. With the Auto-Function in Xtend³ the code will be automatically selected.
Code Types:
— Code 39 — Interleaved 2/5
— Code 128 — Interleaved 2/5 ECC
— EAN-8 — Pharmacode
— EAN-13.
Different barcodes are used at many points in the production of packaging. The evaluation of the codes is essential for error-free production. With the SCAN 400 you are always on the safe side. With the Auto-Function in Xtend³ the code will be automatically selected.
Code Types:
— Code 39 — Interleaved 2/5
— Code 128 — Interleaved 2/5 ECC
— EAN-8 — Pharmacode
— EAN-13.