The Lamina semi automatic Basic is a sheet to sheet laminating/mounting machine. It is an entry level machine, that can expand your finishing business for a low investment.
A wide range of ancillary equipment is avaliable to optimise the efficiency of your machine including automatic feeders, stackers, pressure belt, pre-loading station etc.
For automatic feeding of the bottom sheet. The sheets are fed by continuous running vacuum belts. The stack is filled from the top. The feeder is designed to handle materials with a thickness from 0,6 mm up to 10 mm.
The feeder is designed to handle materials from 200 mm – 1100 mm.
This unit consists of an adjustable press roller system ensuring perfect lamination.
The gluing units for accurate application of cold PVA glue to the upper surface of the substrates are equipped with automatic glue dispensers directly connected to the glue container. The glue is automatically kept by a sengar. During machine standstill the rotation speed of the rollers is reduced to a low idling speed. the precision gluing unit can be made fully accessible for easy cleaning by vertically swinging the top and bottom sheet conveyors up and out of the way.
In the automatic laminating station, the top and bottom sheets are automatically controlled by the registration system. The sheets are registered automatically at the edge as well as at the operator side, resulting in accuracy levels less than +/- 0,5 mm. Photocells prevent the lamination process unless both sheets are properly positioned.
For the stacking of finished products. the table can be turned and pulled out acc to requirements.