MAG 1
SEMI-AUTOMATIC MACHINE TO APPLY FROM ONE TO SIX MAGNETS OR METAL PLATES BY USING HOT-MELT GLUE.
Half-automatic machine to groove board cases and to apply magnets (or metal plates) by hot glue
— Board case feeding by hand
— 1 to max 6 magnets per side/1 work cycle.
Magnet seat milling, glue application, magnet feeding from charger by fully automatic cycle.
Used materials:
— grey board with thickness 1,5 mm up to 4 mm
— magnets with diam. min. 9,5 mm – max 15 mm/thickness 1/1,5/2 mm
Board width: min. 180 mm – max 1550 mm
Production capacity:
— 14 cycles (with 1 magnet)/minute
— 8 cycles (with 2 magnets)/minute
Power required: 5 Kw
Pneumatic consumption: 150 NL/minute (6 bar)
Overall dimensions: L=2500mm; W=2500mm; H=2100mm;