MAG 2
SEMI-AUTOMATIC MACHINE TO APPLY MAGNETS AND METAL PLATES
Half-automatic machine to groove board cases and to apply one or two couples of magnets by hot glue – board case feeding by hand — magnet seat milling, glue application, magnet feeding from charger by fully automatic cycle.
MAG 2/S: Delivery of the processed products on the back side of the machine – Possibility to apply more than 2 couples of magnets per cycle
MAG 2/SR: Including the application of one ribbon (loop) onto the board case
Used materials:
— grey board with thickness 1,5 mm up to 4 mm
— magnets with diam. min. 9,5 mm max 15 mm /thickness 1/1,5/2 mm
Board width: min. 270 mm – max 1200 mm
Magnet distance: min. 240 mm – max 900 mm
Production capacity:
— 14 cycles (with 2 magnets)/minute
— 8 cycles (with 4 magnets)/minute
Power required: 6,2 Kw
Pneumatic consumption: 250 NL/minute (6 bar)
Overall dimensions: L=2500mm; W=2500mm; H=2100mm;