Creasing Matrix G-Tape – Standard.
Tears at the fold or problems in the further processing of the packaging will be a thing of the past thanks to our high-quality creasing matrixes. The basis of our creasing matrixes is made of vulcanised fibre and therefore has excellent mechanical properties. Its extreme hardness and toughness enable a wear-resistant mould contour. In addition, vulcanised fibre is an antistatic material that does not attract dust and therefore does not clog the creasing channel. The locators are precisely designed for the corresponding creasing rule widths. This guarantees that the creasing rule is always positioned centrally to the creasing channel. In addition, the precisely fitting guide stripe profile prevents the tool from falling down when it is turned over. Furthermore, lateral notches have been added which serve as additional nicks and fix the creasing rules even better.
Advantages:
— Higher Creasing Quality;
— Better Production Stability;

— Lateral Film Gluing;
— More Environmentally Friendly Materials.
Creasing Matrix – Reels.
All locators (2–8pt) up to a thickness of 0.8mm are available on reels.
Our creasing matrixes on reels are particularly suitable for the production of larger packaging and displays, as the waste is reduced. Advantages: 1.Higher Creasing Quality, 2.Better Production Stability, 3.Lateral Film Gluing, 4. More Environmentally Friendly Materials.

Matrix G-Tape – Mini. Creasing Matrix for small distances between cutting and creasing rule. Our creasing matrix Type M for 2-3 pt has a total width of only 8 mm and is therefore particularly suitable for small folding caartons as well as for small distances between cutting rule and creasing rule (e.g. glue flaps or window cuttings). Precise Creasing – Efficient Application:Higher Creasing Quality, Better Production Stability, Lateral Film Gluing, More Environmentally Friendly Materials.

Creasing Matrix G-Tape – Offcenter.
Creasing Matrix for double creasing with a short distance between the creasing rules.  Our creasing matrixes with offcenter have an extremely narrow flank (1.3 mm) and are suitable for double creasing with short distances between cutting rule and creasing rule or two creasing rules (e.g. for very small folding cartons). Precise Creasing – Efficient Application:
— Higher Creasing Quality;
— Better Production Stability;
— Lateral Film Gluing;
— More Environmentally Friendly Materials.

Creasing Matrix G-Tape – Reverse Creasing.
Our Type G is the perfect solution for reverse creasing. Precise Creasing – Efficient Application:
— Higher Creasing Quality;
— Better Production Stability;
— Lateral Film Gluing;
— More Environmentally Friendly Materials.

Creasing Matrix G-Tape – Double Creasing. Double Creasing for 180° folding of corrugated board. Our double creasers without center piece are suitable for 180° folding in corrugated board production. Precise Creasing – Efficient Application:
— Higher Creasing Quality;
— Better Production Stability;
— Lateral Film Gluing;
— More Environmentally Friendly Materials.

Crease Gauge measures the height/depth of creasing and controls its quality in simple steps.
— Measuring with High Quality;
— Measuring the height/depth of creasing;
— Quality control with simple steps;
— Record of creasing data for long run jobs.

Steel Shim Tape. The steel shim tape Ribbon Tape is made of cold-rolled precision strip steel (stainless) and is used to patch up of dieforms for diecutting platen presses. The self-adhesive steel shim tape is applied directly to the back of the rules.
— For patching-up of dieforms for diecutting platen presses;
— Self-adhesive.

Patching Tape Profitape. The self-adhesive patching tape Profitape stands for highest quality and ensures perfect handling on flatbed die-cutters. The different thicknesses are easily recognisable by different colours. In addition Profitape is the only patching tape “Made in Germany”. The number one in patching make-ready:
— Precise patching up through highest quality;
— Self-adhesive on all make-ready sheets;
— No detachment from the make-ready sheet;
— Very good adhesion → no slipping when gluing over each other.

Stripping Blades Suteba. Self-adhesive stripping blades Suteba are the cost-effective and quick solution for waste pieces that are too large or problems with stripping. Instead of having the dieboard reworked and thus changing the production process, stripping blades Suteba can simply be glued on the diebord. This saves time and money. Upgradable Stripping Blades:
— Cost-effective & quick solution to put additional blades;
— No expensive rework;
— Better waste disposal because of smaller waste pieces;
— No interruptions of production schedule.

Strip Grip strips are an alternative to self-made waste guides. The strips ensure clean waste transport at the lower stripping plate. First aid material for stripping problems:
— Professional alternative instead of self-made waste guides (cliché foil);
— Clean waste transport at the lower stripping plate.

Stripping Pins and Pin Holders. Stripping pins are the safest way for stripping. The waste is perfectly stripped downwards and there is less production disruption. The safest way for stripping. Lower Stripping Pins:
— Aluminium housing → extra stability for the spring pin;
— For all common machine types of the manufacturers Bobst, Heidelberg and others.
Pin Holder: 3,5 or 7 holes.